Furuno 1832 - Manual (Page 42)

31
(10m)
(5m)
Heading Sensor Connection
Heading signal can be connected to the
“HDG” connector.
Type Code no. Remarks
MJ-A6SPF0007-100 000-125-237 6P-6P 10m
MJ-A6SPF0009-100 000-125-236 w/connector
MJ-A6SPF0003-050 000-117-603 w/connector
Input/Output Data List
Model
Connector
Name
Data Pin In/Out
FCV561M2 J1 183 (1.5) 4 In/Out
FCV581 NMEA 183 (1.5) 4 In/Out
FCV582 NMEA 183 (1.5) 4 In/Out
FCV291 NMEA 183 (1.5/2.0) 6 In/Out
FCV292 NMEA 183 (1.5/2.0) 6 In/Out
FCV668 NMEA 183 (1.5) 4 In/Out
GP1810 IN/OUT 183 (1.5/2.0) 6 In/Out
GP3100M2 IN/OUT 183 (1.5) 6 In/Out
GP8000M2 NMEA 183 (1.5/2.0) 4 In/Out
PS8000M2 NMEA 183 (1.5/2.0) 4 In/Out
GP80 DATA1 183 (1.5/2.0) 6 In/Out
GP80 DATA2 183 (1.5/2.0) 6 In/Out
GP1800M2 IN/OUT 183 (1.5/2.0) 6 In/Out
Note: All plotter in the table except the GP-
1800M2 can receive TLL data.