Fisher VDC-D2184VA - Manual (Page 7)

SETTINGS
When changing the settings and adjustments for this camera, loosen the camera unit screw (A) and remove the lens unit in the direction of the
arrow. When changing the DIP switch settings, take care when making the settings and adjustments because power is still being supplied to the
camera.
Control name Position
1 Color and Black/White level switch (C/B)
(Normal: LOW/High sensitivity: HI)
LOW
23 High speed electronic shutter setting (ES) 1/60 sec.
4 Aperture compensation setting (AP)
(Sharp: SHRP/Normal: NORM)
SHRP
5 Backlight compensation setting (BL-M)
(ON (MULT)/OFF)
OFF
6 Backlight compensation setting (BL-C)
(ON (CENT)/OFF)
OFF
7 White balance switch (WB) and color
(R or B) adjustment volume
ATW
8 Synchronization setting (SYNC)(LL/INT) INT
9 Line phase adjustment (PHASE) adjustable
F Lens iris level adjustment adjustable
(A)
1 2 3 4 5 6 7 8
HI
C/B ES AP BL-M BL-C WB SYNC
1 2 SHRP ON ON MANU LL
LOW OFF OFF NORM OFF OFF ATW INT
F
VR121
7
1
ON
2 3 4 5 6 7 8
9
The illustration shows the factory default settings for the switches in the camera setup section.
L5AK4/US, L5AL4/US GB 2003, 6, 6
6
English