FUJITSU C141-E090-02EN - Manual (Page 21)

C141-E090-01EN 1 - 6
(3) Current Requirements and Power Dissipation
Table 1.3 lists the current and power dissipation.
Table 1.3 Current and power dissipation
Typical RMS current (*1) [mA]
+12 V +5 V
Model MPE
3102AH
MPE
3136AH
MPE
3204AH
MPE
3273AH
All
Models
MPE
3102AH
MPE
3136AH
MPE
3204AH
MPE
3273AH
Spin up 1600
1800 peak
1600
1800 peak
1600
1800 peak
1600
1800 peak
540
640 peak
21.9 21.9 21.9 21.9
Idle (Ready)
(*3) 340 340 400 460 420 6.2 6.2 6.9 7.6
R/W (On Track)
(*4) 340 340 400 460 450 6.3 6.3 7.1 7.8
Seek (Random)
(*5) 640 640 670 700 420 9.8 9.8 10.1 10.5
Standby 7.0 7.0 7.0 7.0 185 1.0 1.0 1.0 1.0
Sleep 7.0 7.0 7.0 7.0 185 1.0 1.0 1.0 1.0
*1 Current is typical rms except for spin up.
*2 Power requirements reflect nominal values for +12V and +5V power.
*3 Idle mode is in effect when the drive is not reading, writing, seeking, or executing any commands. A portion of the R/W circuitry is powered
down, the spindle motor is up to speed and the Drive ready condition exists.
*4 R/W mode is defined as 50% read operations and 50% write operations on a single physical track.
*5 Seek mode is defined as continuous random seek operations with minimum controller delay.
Typical Power (*2) [watts] Mode of Operation