FUJITSU FTP-628MCL053 - Manual (Page 3)

3
FTP-628MCL053/054
n SPeCiFiCATiONS
*+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability)
Item Specifications
Interface Conforms to RS232C / centronics
Power supply For print head 4.2 to 8.5VDC average current, 0.87 (0.93) A peak value
(print ratio: 12.5%, print speed: 50mm/sec. at 7.2V)
For motor 4.2 to 8.5VDC, A maximum
Note: 5.8 to 8.5V is recommended for automatic paper loading
For logic 3.0 to 5.25VDC, 0.A maximum
Dimension
W x D x H
Printer
mechanism
MCL053 83.5 x 35.7 x 15.5mm
MCL054 72.3 x 34.3 x 15.5mm
Interface board 69.3 x 34.3 x 5.5mm
Weight Printer
mechanism
MCL053 Approximately 49g (with knob)
MCL054 Approximately 47g
Interface board (std) Approximately 20g
Head Life Pulse resistance: 00 million pulse/dot
(using Fujitsu's standard driving method)
Abrasion resistance: paper traveling distance 50km (at 2.5%
print ratio or less)
Environmental
conditions
Operating temperature -0ºC to +50ºC
Operating humidity 20 to 85% RH (no condensation)
Storage temperature -20ºC to +60ºC
Storage humidity 5 to 90% RH (no condensation)
Detection Head temperature Detected by thermistor
Paper out/mark detect Detected by photointerruptor
Head up detection Detected by micro-switch
Recommended
thermal
sensitive paper
High sensitive paper TF50KS-E4 (Nippon paper)
Standard paper TF60KS-E2 (Nippon paper)
FTP-020PU00 (58mm)
PD50R (Oji paper)
FTP-020P0701 (58mm)
Medium life paper TF60KS-F (Nippon paper)
FTP-020P002 (58mm)
PD170R (Oji paper)
P220VBB- (Mitsubishi paper)
Long life paper PD60R-N (Oji paper)