Connecting the power cable -6 – FUJITSU M3092DC User Manual
Page 30
2-6
M3092DC Image Scanner Operation Guide
2.3.3 Connecting the Power Cable
1)
Connect the power cable to the inlet of the scanner.
2)
Insert the AC adapter into the outlet.
Inlet
!
Key point
−
The image scanner is not equipped with a power switch. When
connecting a cable or changing the setting, be sure to first
disconnect the power cable from the outlet.
−
While the driver and the software is active, the reading lamp
turns on or off in accordance with the status of the connected
personal computer.