FUJITSU M3092DC User Manual
Page 22
1-4
M3092DC Image Scanner Operation Guide
Component Name
Function
Document support
Accommodates documents to be read by the automatic
document feeder.
Document guide
Holds documents so that they are transported straight.
Automatic document feeder
(ADF)
Reads documents automatically.
Copy density
dial
Adjusts copy density (dark/light) in five stages.
Function No.
display panel
Displays a copy count, or also displays the scanner read
mode as follows:
On: Single-side reading mode
Blink: Double-sided reading mode
Mark: An application is being activated
When the AC adapter is connected to the scanner or the
PC’s power is turned on, the initialization of scanner is
executed. The display on the panel changes as follows:
P
→
0
→
1 (When 1 appears, scanner is ready)
Function button
Selects a function to be started using this button.
This button’s function is set using Launch.
Duplex button
Switches between read modes. You can confirm the
current read mode with the Function No. display panel.
Send to button
Starts the operation specified by the Function button.
Scan button
Scans the document placed in position.
Operator
panel
Power lamp
Stays lit while power is being supplied.