Clock and timer – Fisher & Paykel OR90 User Manual

Page 19

Buttons:

Timer

Cooking time

End of cooking time

Decreases the number shown on the display or

changes the volume of the beeps

Increases the number shown on the display

Illuminated symbols:

- oven in manual position (on except when oven is set for automatic cooking)

A - flashing - oven in automatic position but not set or an automatic program has

finished

A - steady illumination - oven set for automatic cooking

Timer in operation

Setting the clock

When first connected, or after a power failure, ‘0

00’ and ‘A’ will flash on the display.

To set the clock, press the

and

buttons together and then the

and

buttons.

Note: changing the time will delete any automatic program.

Using the timer

The timer can be set for up to 23 hours and 59 minutes.

To set the timer, press the

button, then the

and

buttons.

To check the remaining time, press the

button.

When the time is up, the timer will beep. Press the

button to turn it off.

Note: if ‘A’ is flashing on the display, press the

and

buttons together.

Setting the timer volume

You can select from three volume levels by pressing the

button.

FOUR FUNC

TION MODELS

VEN-FUNC

TION MODELS

Clock and timer

Fig. 21 Clock display and control buttons