Fisher-Price M5726 - Manual (Page 5)

5 5
• Fit the net tube through the sleeve in the center of the net.
8
ASSEMBLY ASSEMBLY
Post
Cover
Post
Cover
• Fit a post cover over the end of a side tube and onto a post.
• Insert five #8 x
3 /
4
” screws into the post cover and tighten.
• Repeat this procedure to attach the other post cover.
9
• Line up the holes in the ends of the net tube with the hole in
each side tube.
• Insert a #10 x 1 1 /
2
” screw into each side tube and tighten.
10
Net Tube
Net Tube
Side
Tube
• Line up the holes in a plastic tab on the net side flap with the
holes in the post.
• Insert three #8 x 3 /
4
” screws into the plastic tab and tighten.
• Repeat this procedure to attach the plastic tab on the other
net side flap to the post.
Plastic Tab Plastic Tab
11