FUNAI FDP-100 - Manual (Page 16)

Introduction
16
CAUTIONS
z Do not install the printer in the following places.
− Smoky or dusty places
− Places subject to direct sunlight
− Steamy places
− Places close to heating equipment
− Places subject to high temperature such as sun-heated cars
z Do not place heavy objects on the printer.
z Do not get on top of the printer.
z Unplug the power cord of the printer when the printer is not in use.
z Do not move the printer while being plugged in.
z Remove dust or other foreign matters adhering to the power plug periodically.
z Confirm that the power cord is plugged into the power outlet firmly.
z Do not plug/unplug the power cord with the wet hands.
z Do not block the air vents on the printer.
z Do not reach into internal parts of the printer other than those specified in the
User’s guide.
z Do not install the printer in narrow or ill-ventilated places.
− Do not install the printer on the bookshelves or into the closet.
− Do not install the printer on the carpet or mattress.
− Do not cover the printer with table cloth and like that.
z Unplug the power cord before cleaning or maintenance.
z Do not remove the Paper tray during printing.
z Do not use the printer near open flames.