Safety precautions, Warnings – FUNAI FDP-100 User Manual
Page 15
15
Introduction
Before using the printer, read the safety precautions and follow them, or there may be fire,
electric shock, injuries or malfunction.
WARNINGS
z
Do not disassemble or remodel the printer.
z
Do not use the printer if the printer is dropped or the casing becomes damaged.
z
Unplug the power cord immediately if the printer emits smoke or abnormal odor,
or shows other signs of significant malfunction.
z
Do not place liquid containers such as glasses, vases or flowerpots on the printer
for preventing water or foreign objects from getting into the printer.
z
Do not drop or insert foreign objects such as metallic or flammable objects.
z
Do not touch the power plug during thunderstorms to avoid electric shock.
z
Do not damage the power cord.
Unplug the power cord immediately if it becomes damaged, and consult your
dealer.
Do not handle the power cord in the following manner.
−
Pulls the power cord forcibly.
−
Binds up the power cord.
−
Converts the power cord.
−
Bends or twists the power cord excessively.
−
Heats the power cord.
−
Rests heavy objects on the power cord.
z
Do not operate the printer outside of the specified voltage rating.
z
Do not handle the power cord with the wet hands.
z
Do not use the AC adapter or the power cord other than those specified.
z
Do not use the AC adapter or the power cord supplied with the printer for other
products.
z
Do not install the printer on an unstable or tilted table.
z
Do not let the printer get wet.
z
Do not plug too many leads into a single socket.