FieldServer FS-8700-70 - Manual (Page 13)

FS-8700-70 WS3000 Tabs Manual Page 13 of 14
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]
5.3.3. Map Descriptor Example.
// Server side Map Descriptors
Map Descriptors
Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, Function, node_name
Point_data_0, Points_0, 0, passive, Tabs_0
This can be
any name but
each name
must be
unique. Name
will appear in
FieldServer
Map
Descriptor
status
information
screens. The Data
Array name
must be one
found under
Data_Arrays
Data will be
sent from
this array to
the device
polling this
TABS
device.
This value
specifies the
offset into the
Data Array
where the
data will be
stored for
testing with
scripts. Function may
not be read or
write since it
implements a
Server.
Function may
only be
passive. The TABS
device’s
station
address (0 –
31).