Furuno MODEL 1622 - Manual (Page 21)

13
Note 1: External sensor must be capable of
outputting such data to select it on this radar.
Note 2: A location is blank when there is no
corresponding data.
Note 3: To receive data from multiple
equipment, all data must be combined into one
data line with a data-mixing device.
1.26 Echoes in Black or White
The default setting displays echoes in black on
a white background. However, you may reverse
this arrangement as shown below. Note that the
default setting, echoes in black, is restored
when the power is turned off.
1. Press the [MENU] key.
2. Select VIDEO.
3. Select RVS.
4. Press the [MENU] key.
1.27 Selecting Ranges to Use
This radar has 13 ranges, some you may not
require. You can select the ranges to use as
follows:
1. Press the [MENU] key.
2. Select RANGE (on page 2 of the menu).
3. Select range to use and press the [EBL]
key.
4. Press the [MENU] key.