FieldServer Weigh-Tronix FS-8700-36 - Manual (Page 3)

FS-8700-36 Weigh-Tronix Driver Manual
FieldServer Technologies 1991 Tarob Court, Milpitas, California 95035 (408) 262-2299 fax: (408) 262-9042
Visit our website: www.fieldserver.com E-mail: [email protected]
Page 1
1. Weigh-Tronix Description
The Weigh-Tronix driver allows the FieldServer to transfer data to and from devices
over either RS-232 or RS-485 using Weigh-Tronix protocol. The FieldServer emulates a
Client only.
The information that follows describes how to expand upon the factory defaults provided
in the configuration files included with the FieldServer.
Devices Supported
Manuf Model Notes
Weigh-Tronix WI 125
Weigh-Tronix WI 127
Weigh-Tronix WI 130
*Other devices – contact FST
1.1 Hardware/Software
Supplied by FieldServer Technologies.
FieldServer
Technologies
PART #
DESCRIPTION
FS-8915-10 UTP cable (7 foot) for RS-232 use
FS-8917-01 RJ45 to DB25M connector adapter
Provided by user
PART # DESCRIPTION
Weigh-Tronix Simposer Software
Cables for PC to scale to configure scale