FUJITSU Image Scanner fi-6110 - Manual (Page 2)

2
Safety Precautions
The provided "Safety Precautions" document
contains important information about the safe use
of the scanner. Before using the scanner, make
sure to read and understand the information
provided in the "Safety Precautions" document.
Symbols Used in This
Manual
The following symbols are used in this manual.
Removing the Protective
Packaging
The scanner comes in a variety of protective
packaging. Follow the procedure described below
to remove the packaging before using the
scanner.
1.
Open the stacker, and peel off the tape to
remove the protective foam sheet from the
ADF.
2.
Pull the ADF release tab to open the ADF,
and pull the tape to remove the protective
card.
Installing the Scanner
Software
The following software is bundled with the
scanner.
z TWAIN Driver
Conforms to the TWAIN standard. Used when
you operate the scanner using TWAIN-
compliant applications.
z ISIS Driver
Conforms to the ISIS standard. Used when you
operate the scanner using ISIS-compliant
applications.
z Software Operation Panel
Configures settings for scanning behavior and
consumables management. Installed together
with the scanner drivers (TWAIN/ISIS drivers).
z Error Recovery Guide
Shows the error status and the action to take
when an error occurs. Installed together with
the scanner drivers (TWAIN/ISIS drivers).
z Image Processing Software Option (trial)
A software option featuring advanced
binarization of scanned images.
z ScandAll PRO
A TWAIN/ISIS-compliant image scanning
application (recommended). You can define
scanning settings as batch profiles to suit your
various operation requirements. By defining
scanning settings as batch profiles, you can
easily perform scans in accordance with
various operation requirements.
Symbol Description
This symbol alerts operators to an
operation that, if not strictly
observed, may result in severe
injury or death.
This symbol alerts operators to an
operation that, if not strictly
observed, may result in safety
hazards to personnel or damage
to equipment.
This symbol alerts particularly
important information. Be sure to
read this information.
This symbol alerts operators to
helpful advice regarding
operation.
WARNING
CAUTION
Protective
Foam Sheet
and Tape
ADF
Stacker
Bundled Software
ADF Release
Tab
ADF
Protective
Card and
Tape