Furuno NAVPILOT 500 - Manual (Page 71)

FURUNO
NAVPILOT-500
SP - 1 E7250S01A
SPECIFICATIONS OF AUTOPILOT
NAVPILOT-500
1 CONTROL UNIT
1.1 Display Monochrome LCD, 83 (W) x 83 (H) mm, 160x160 dots
1.2 Backlight Adjustable in 8 steps
1.3 Contrast 16 steps
1.4 Useable Set 6 sets
2 PROCESSOR UNIT
2.1 Rudder Mode Manual, Auto, Dodge, Remote, Navigation*
2.2 Weather Adjustment AUTO/CALM/MODERATE/ROUGH
2.3 Rudder Angle Ratio AUTO/0-9
2.4 Rudder Angle Equivalent AUTO/0-9
2.5 Rudder Angle Settings 45° max.
2.6 Alarm Bearing deviation, Out of course*, Watch, Ship’s speed*,
Water temperature*, Depth*, Log*
*: Navigation data required
3 INTERFACE
3.1 Ports Navigation data (NMEA): 1, Output (NMEA): 1
Input (NMEA): 1, I/O for Bearing Sensor (NMEA): 1
3.2 Input Sentences IEC 61162-1 ed1/2, IEC 61162-2, NMEA 0183 1.5/2.0/3.0
Command Bearing APA, APB, BOD/XTE, RMB
Ship’s Location (L/L) GGA, RMC, RMA, GLL
Ship’s Location (LOP) GLC, GTD, RMA
SOG/COG VTG, RMC, RMA
STW VHW
Heading (HDG) HDT, HDG, HDM
Destination RMB, WPL
Bearing/distance RMB, BWC, BWR
Time RMC, ZDA
Arrival Alarm AAM, RMB
Cross Track Error APB, XTE, RMB
Water Depth DPT, DBT
Water Temperature MTW
Wind Speed/Bearing VPW, MWD, MWV
3.3 Output Sentences NMEA 0183 1.5/2.0/3.0
GGA, RMA, RMC, GLC, GTD, VTG, VHW, WPL, BWC, BWR, ZDA,
AAM, APB, XTE, DPT, DBT, MTW, VPW, MWD, MWV
3.4 I/O Control RS-232C