Assembly – Fisher-Price VOLKWAGEN NEW BEATLE M3865 User Manual

Page 19

ASSEMBLY

M3865pr-0920

• Cut the steering wheel labels (#29, #30 and #31) from the larger

label sheet. Now, position the steering wheel labels, as shown in the
illustration, around the steering wheel.

Hint: These labels will be applied around the spokes on the steering
wheel. Carefully apply the center portion of each label to the topside of
each spoke. Gently smooth the label around each spoke.
• Remove the backing from label 29 and apply the label to the left spoke.
• Remove the backing from label 30 and apply the label to the

bottom spoke.

• Remove the backing from label 31 and apply the label to the right spoke.

Steering Wheel

Left
Spoke

Bottom
Spoke

Right
Spoke

Label 30

Label 29

Label 31

• Position the steering wheel with the large opening upright.
• Position the steering column so that the bend is upright, as shown.
• Fit the steering column through the center hole in the steering wheel.

Large Opening Upright

Steering Wheel

Steering Column

Bend
Upright

• Fit a .354 black cap nut onto the end of the steering column.
• Tap the cap nut with a hammer to secure it on the steering column.
Hints:
- You may need the help of another adult to keep these two parts in

the correct position.

- You may want to position the steering column on a scrap block of

wood to protect the assembly surface.

Steering
Column

.354 Black
Cap Nut

• With the large opening in the steering wheel upright, fit the curved

end of the steering column down into the large hole in the windshield.

• Continue to insert the curved end of the steering column through the

small, rectangular opening in the floor of the vehicle.

Curved End

of Steering

Column

Small

Rectangular

Opening

Windshield
Large Hole

.354"