Assembly – Fisher-Price VOLKWAGEN NEW BEATLE M3865 User Manual

Page 13

ASSEMBLY

M3865pr-0920

• Turn the vehicle on its side.
• Fit a lock washer, rounded side up, into the

assembly tool. Make sure it fits completely
inside the assembly tool.

• Fit the assembly tool (with lock washer in it) onto the end of the

rear axle.

• Tap the assembly tool with a hammer to secure the lock washer on

the end of the rear axle.

• Pull on the lock washer to be sure it is secure on the rear axle.

Rear
Axle

Assembly Tool with
Lock Washer Inside

BOTTOM VIEW

Assembly Tool

Lock Washer

Rounded Side UP

• Turn the vehicle upright (or keep on its side).
• Insert one of the tabs on the hubcap cover into a slot in the hubcap.
• Then, push with your fingernail (or carefully with a slotted

screwdriver), the other two hubcap cover tabs into the slots
in the hubcap.

• Repeat this procedure to assemble another hubcap cover to the

other hubcap.

Hubcap

Cover

Tab

Slots

• Fit another wheel (with a round bushing inserted) onto the end of the

rear axle. Make sure the outside of the wheel (smooth side) faces out
and the ribs on the inside of the wheel fit in the grooves in the driver.

• Fit a rectangular bushing, base side out, onto the rear axle.
• Push the rectangular bushing so that it fits into the rectangular

opening in the wheel.

• Fit a hubcap to the outside of the wheel. Make sure the peg on the

hubcap fits into the small hole in the outside of the wheel.

Outside of Wheel

Rectangular

Bushing

Driver

Grooves

Peg

Small

Hole

Hubcap

• Fit the driver onto the end of the rear axle.
• Align the ribs on the inside of the driver with the gearbox teeth. Fit

the driver to the gearbox.

Rear Axle

Driver

Gearbox

Teeth

Base