Assembly – Fisher-Price VOLKWAGEN NEW BEATLE M3865 User Manual

Page 16

ASSEMBLY

M3865pr-0920

• Slide a

" large washer onto the

short end of each front axle.

• Position the steering linkage cover

over the steering linkage. Make sure
the A and B markings in the steering
linkage cover match the A and B
markings in the steering linkage. Fit
the steering linkage cover onto the front axles.

Note: The steering linkage curve should still face you.

Front
Axle

Steering
Linkage
Cover

Large
Washer

A Marking

B Marking

Steering

Linkage Curve

TOWARD You

• Fit a .437 white cap nut onto the end of a front axle.
• Tap the cap nut with a hammer to secure it to the front axle.
• Repeat this procedure to fasten another .437 white cap nut to the

other front axle.

Front
Axle

Cap
Nut

• Turn the steering assembly

over, with the smooth side up.

• Fit the steering linkage

assembly to the front end of
the vehicle.

IMPORTANT! Make sure the notch on the steering linkage assembly
aligns with the notch in the front end of the vehicle.

Notch

Steering Linkage

Assembly

(Smooth Side Up)

Notch

• Insert two

" x 1

" screws through the deep holes in the steering

linkage assembly and into the vehicle.Tighten the screws.

• Pull up on the steering linkage assembly to be sure it is secure. If it is

not secure, tighten each screw a few more turns.

Deep
Holes

.437"

Steering
Linkage