Assembly – Fisher-Price B8866 User Manual
Page 7
Seat
Height
Adjuster
Seat
Height
Adjuster
Seat
Bottom
Tube Ends
Back and
Bottom View
7
Assembly
• Push each seat height adjuster
to be sure they are completely
on the seat bottom tubes.
• Insert a #8 x 1.9 cm (
3
/
4
") screw into each seat height
adjuster and the ends of the seat bottom tube.
• Tighten the screws.
Seat Bottom
Tube Ends
13
Push
Seat
Height
Adjuster
Push
Seat
Height
Adjuster
#8 x 1.9 cm (
3
/
4
")
Screw - 2
SHOWN ACTUAL SIZE
#8 x 1.9 cm (
3
/
4
")
Screw - 2
SHOWN ACTUAL SIZE
12
• From the back and bottom of the assembly, insert a
#8 x 1.9 cm (
3
/
4
") screw through both seat height adjusters
and the ends of the seat bottom tube.
• Tighten the screws.
• Fit the frame front legs into the other base.
• Fit a screw retainer over a hole in the base.
• Insert a #10 x 2.2 cm (
7
/
8
") black screw into the screw
retainer and tighten.
• Repeat this procedure to fasten the other end of the base
with the remaining screw retainer and #10 x 2.2 cm (
7
/
8
")
black screw.
Front Leg
Holes
Base
Screw Retainers
11
#10 x 2.2 cm (
7
/
8
")
Black Screw - 2
SHOWN ACTUAL SIZE
Screw Retainer - 2
Hint: The #10 x 2.2 cm (
7
/
8
") black screws may have been
assembled to the screw retainers.