Fisher-Price B8866 - Manual (Page 10)

10
Assembly is now complete.
Assembly
• From behind the seat, be sure the shoulder portion of the
waist/shoulder belts are secure in the seat back slots.
• Fit the pad strap through the handle and press it to the
fastener on the back of the seat.
• Hook the elastic loops on each side of the pad onto the tabs
in the seat back.
Elastic
Loop
Pad Strap Handle
Elastic
Loop
Tab
Tab
Belt
Ends
Back View
19
• Place your child in the seat. Position the crotch belt between
your child’s legs.
• Fasten both waist/shoulder belts to each side of the crotch
belt. Make sure you hear a "click" on both sides.
• Check to be sure the restraint system is securely attached by
pulling it away from your child. The restraint system should
remain attached.
Crotch
Belt
Waist/Shoulder
Belt
IMPORTANT!
• Before each use, inspect this product for damaged hardware,
loose joints, missing parts or sharp edges. DO NOT use if any
parts are missing, damaged or broken. Contact Mattel for
replacement parts and instructions if needed. Never
substitute parts.
• Place the high chair on a level, stable surface away from
electrical flexes. Be sure to keep electrical flexes out of
child‘s reach.
Waist/Shoulder
Belt
1
Prevent serious injury or death
from falls or sliding out.
The child should at all times wear
a safety harness correctly fitted
and adjusted.
WARNING
Securing Your Child