FUJITSU SRS-9924 - Manual (Page 95)

6-3
6
NI
/
5E Custom
T
erminal Accessories
Wall Kit
Figure 6-3:
Mounting Kit
The terminal is attached to the wall by:
1. Attaching the mounting kit to the wall as shown
in the illustration. Three screws hold the
terminal mount, and two screws hold the
optional ABM mount.
2. Connecting the lower hook of the wall kit to
the bottom of the terminal.
3. Connecting the upper hook of the wall kit into
the slot on the bottom of the terminal.
Mounting kit
ABM Mounting kit
Lower hook
Upper hook