Fisher-Price M7596 - Manual (Page 5)

5 5
Assembly Assembly
Sounds and
Lights Box
• Turn the frame on its side.
• Fit the sounds and lights box onto the dash on the topside of
the vehicle.
• Then, fit the retainer over the battery compartment door on the
underside of the frame. Insert four #8 x 3 /
4
” screws into the retainer
and tighten.
• Turn the frame upright.
Sounds
Lights
1
Retainer
Frame • Slide a 3 /
16 16
” washer onto the front axle labeled 2.
• Then, slide a front bushing, flat side first, onto the front axle.
2
3 /
16 16
”
Washer Front
Bushing
Front Axle
BOTTOM VIEW
2
• Fit a cap nut onto the end of the front axle.
• Tap the cap nut with a hammer. Gently pull the wheel to make
sure the cap nut is securely attached to the front axle.
• Fit a wheel cover onto the hubcap, and push to “snap” in place.
4
Cap Nut
Wheel
Cover
• Slide a wheel, smooth side first, onto the front axle.
• Then, slide a hubcap, post side first, onto the front axle and into
the wheel.
3
Wheel
Hubcap
Front Axle