Assembly – Fisher-Price 73528 User Manual

Page 6

Assembly

• Place the front wheel assembly between the fork arms

so that the pedal axle fits into the groove at the bottom
of each fork arm.

• Place a fork cover over the pedal axle on one fork arm.
• Insert two #10 x ¾" screws into the fork cover

and tighten.

• Repeat this procedure to attach the other fork cover to

the other fork arm, using the #10 x ¾" screws.

Fork Cover

Fork Arms

Groove

Pedal Axle

Front Wheel Assembly

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052, U.S.A.

designate U.S. trademarks of Mattel, Inc.

• Turn the frame upright.
• Insert the fork post up through

the hole in the frame neck. Make sure the fork is
positioned so that the fork covers face the rear wheels.

• Place the handlebar over the fork post and push it down

onto the frame. Make sure the handlebar is positioned so
that the screw hole faces the rear wheels and aligns with
the screw hole in the fork post.

• Insert the #8 x 3" screw through the hole in the handlebar

and into the fork post so that part of the screw (about ¾")
is still visible. Tighten the screw.

Handlebar

Frame Neck

Fork Covers

Fork Post

PRINTED IN MEXICO

73528c-0920

FIRST, insert the screw

so that ¾" is visible.

THEN, tighten the screw.

¾"