Fisher-Price 73528 - Manual (Page 5)

5
Assembly
• Fit the wheel cap into the center of the wheel. Tap the
wheel cap with a hammer to secure it to the wheel.
• Set the frame assembly aside.
4
Wheel Cap
3
• Turn the frame on its side with the exposed end of the
straight axle up.
• Place the assembled rear wheel on the scrap block
of wood.
• Slide the other rear wheel (spoke side up) onto the end
of the straight axle.
• Place a cap nut on the end of the straight axle.
• Place the assembly tool over the cap nut and tap it with
a hammer. Gently pull the rear wheel up to be sure
the cap nut is securely attached to the straight axle.
Cap Nut
Straight Axle
Rear Wheel
Spoke Side Up
Assembled
Rear Wheel
Assembly Tool
Scrap Block
of Wood
• Fit two pedal axle covers onto the pedal axle metal tabs.
Make sure the metal tabs fit into the slot in each pedal
axle cover.
• While holding the pedal axle covers on the pedal axle,
insert the pedal axle into the hole in the center of the
front wheel.
• Push the pedal axle covers into the center of the front
wheel until they are flush with the surface of the
front wheel.
• Repeat this procedure with the other two pedal axle
covers on the other side of the front wheel assembly.
5
Pedal Axle
Cover
Pedal Axle
Cover
Metal Tab
Slot
Pedal Axle