Frymaster YSCF14G - Manual (Page 13)

YSCF14G SERIES GAS FRYERS
CHAPTER 3: BUILT-IN FILTRATION
3-3
Assemble the filter as follows:
1. Place the support grid in the bottom of filter pan.
2. Center the filter pad in the filter pan with the notch
toward the pick-up tube.
3. Position the hold-down ring on the filter pan with the
notch toward the pick-up tube.
4. Place the crumb screen in the filter pan. Allow the
crumb screen to rest on the top edges of the hold-down
ring.
5. Place filter pan cover onto the filter pan
assembly. Ensure the front cover is correctly
positioned over the slip fitting.
The filter pan is shown partially inserted under the
fryer.
Support grid properly placed in filter pan.
Hold-down ring shown over filter pad. Filter pan shown with pad, hold-
down ring and crumb tray in place.