Assembly – Fisher-Price B8776 User Manual

Page 4

Assembly

• Fit the tabs on the wheel cap into the slots in the

wheel hub. Push to "snap" the wheel cap in place.

• Repeat this procedure to attach the other wheel cap to

the other wheel hub.

• Fit two pedal hubs onto the pedal axle tabs. Make sure

the tabs fit into the slot in each pedal hub.

Front Wheel Hole

• Fit the cap nut on the end of the straight axle.
• Tap the cap nut with a hammer. Gently pull the rear

wheel to be sure the cap nut is securely attached
to the straight axle.

Hint: You may need the help of another adult to hold
the other end of the straight axle in place.

Wheel Hub

Wheel Cap

Pedal Hub

Pedal Axle Tab

• While holding the pedal hubs

on the pedal axle, insert the
pedal axle into the hole in the
center of the front wheel.

• Press the pedal hubs into the center of the front wheel

until they are flush with the surface of the front wheel.

• Turn the front wheel

assembly over.

• Insert the remaining pedal

hubs on top of and below the pedal axle and into the
hole in the center of the front wheel.

• Press the pedal hubs until they are flush with the

surface of the front wheel.

PRINTED IN MEXICO

B8776pr-0920