Furuno IF-NMEASC - Manual (Page 18)

10
5. MAINTENANCE, TROUBLE-
SHOOTING
This chapter provides the information for keeping your unit in good working order.
5.1 Preventive Maintenance
Regular maintenance is important for good performance. Following the procedures in the table be-
low will help maintain performance
Preventive maintenance
Item Check point Remedy
Cabling Visually check cabling for
signs of wear and damage. Replace damaged cables.
Ground Check ground wire. Check that ground wire is tightly fastened.
Check ground point for corrosion.
Cover Cleanliness of cover. Dust can be removed with a soft cloth. Do not use
chemical based cleaners to clean the cover, as they
can remove paint and markings and deform the cov-
er.
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
Only qualified personnel
should work inside the
equipment.
NOTICE
Do not apply paint, anti-corrosive
sealant or contact spray to coating
or plastic parts of the equipment.
Those items contain organic solvents
that can damage coating and plastic
parts, especially plastic connectors.