Furuno IF-NMEASC - Manual (Page 11)

2. WIRING
3
Cable construction
3 Approx. 70
Armor Braided shield
Data cable
TTYCS-1
or equivalent
Data cable
TTYCS-4
or equivalent
Power cable
DPYC-1.5
or equivalent
Approx. 40 3
Armor
Sheath
Vinyl tape 45
Scrape off paint.
Lay this part on applicable cable
post and fix with two cable ties.
Vinyl tape
45
Scrape off paint.
Lay this part on applicable cable
post and fix with two cable ties.
3 Approx. 70
Armor
Braided shield
Vinyl tape.
Approx. 120
Aluminum tape
Cover drain wire
with vinyl tubing.
Cable connected to SC-30
MJ-A10SPF0015-150C
7-core
6
6
6
6
Lay this part on applicable cable
post and fix with two cable ties.
Vinyl sheath
Data transmission cable
supplied by FURUNO Approx. 90
Braided shield
Solder vinyl wire to
braided shield.
6
Lay this part on applicable cable
post and fix with two cable ties.
Solder vinyl wire to
braided shield.
Solder vinyl wire to
braided shield.
Lay this part on applicable
cable post and fix with two
cable ties.
Conductor
S = 1.5 mm
φ = 1.56 mm
2
Armor
Sheath
φ = 11.7 mm
Conductor
S = 0.75 mm
φ = 1.11 mm
2
Armor
Shield
Sheath
φ = 10.1 mm
Conductor
S = 0.75 mm
φ = 1.11 mm
2
Armor
Shield
Sheath
φ = 16.3 mm
WARNING
Do not connect this unit to NMEA 2000 bus.
It is intended for one-to-one connection with the SC-30. Connection to
an NMEA 2000 bus can result in network trouble and, in the worst case, fire.