Freedom9 KVM-08H - Manual (Page 12)

Chapter 2: Hardware Installation
9
Step 7
Check all of the connections carefully. The keyboard and mouse connectors are color coded to
help in connecting the keyboard and mouse cables to the correct ports.
Step 8
Attach the power supply to the KVM unit and plug the other end into an electrical receptacle.
Now you will see the LED for Port 1 light up, and you will hear a beep. Switch on your monitor.
NOTE:
Though the computers connected to KVM Switch are able to support enough power to the
stand alone switch, it is suggested that the power adapter be plugged in. The KVM Switch
will need a power adapter to daisy chain more banks and if you forget to plug in the power
adapter on the status of daisy chain, it may cause unexpected operation.