Frymaster cm45 s - Manual (Page 7)

CM4-S Cooking Computer — Programming with Filtration
3-1
1 2 3 4 5 6 7 8 9 10
CM4-S
1 2 3 4 5 6 7 8 9 10
ON/OFF Temp
Product Buttons
Exit Cool
Checkmark
Programming Key Not visible
Product Buttons
Programming for Segmented Cooking Cycles
(Filter Mode)
1. Establish the total number of cook cycles before the computer
prompts a filter cycle.
2. Press , the ON/OFF button to turn computer off.
3. Display shows OFF.
4. Press hidden programming button in Frymaster logo. (See diagram
above)
5. Display shows CODE on left side.
6. Enter 1658 using numbered product keys .
7. GBL FILT (lGBL and rGBL appear if the computer is
configured for a splitpot) appears in the left display, 0 or a
previously programmed number appears in the right.
8. Use the product keys to enter the number of cook cycles before the
computer calls for filtering.
9. Press . Computer displays OFF.
10. Establish the total cooktime
and the number and
temperatures of the cook
segments for your product.
You will find drawing a diagram helpful. See graphic on page 1-1
and above. In this example cooking segments of 2 minutes at 340°F,
4 minutes at 320°F, 3 minutes at 310°F and a final cook segment of
4 minutes at 330°F are set.
11. Press hidden programming button in Frymaster logo. (See diagram
above)
12. Display shows CODE on left side.
Programming
Hint
When using the
global filtering
feature of the
CM4-S, the
computer counts
the amount of
product cooked
and calls for
filtering when the
count reaches a
predetermined
number, which is
set by the user.
The computer
must be connected
to the drain valve
safety switch to
provide all the
features described
at right.
• Entry of the
amount of
product to
cook before
calling for
filtering is
detailed in
steps 1-8 at
right.
• The amount of
product
assigned to a
product button
is entered at
step 16.
2 min
4 min. 4 min.
Total time: 13 min
3 min.
340°F
330°F
310°F
330°F