Frymaster cm45 s - Manual (Page 17)

CM4-S Cooking Computer —Programming for non-Filtering
4-4
52. Press . Sens appears in the left display; 0 or a previously
set sensitivity setting appears in the right.
53. Use product keys to enter sensitivity.
54. Press .
55. Segment appears in left display; Prod 1 in right. All
programmed buttons are illuminated.
56. Nine minutes of the 13-minute cooktime have been programmed.
No additional programming is required. The computer will take the
oil to the last setpoint, which was established in step 48 and
countdown the remaining 4 minutes.
57. Press to leave programming for this product button.
58. Product appears in the left display. Right display is blank.
59. Press next product button to be programmed with segmented
cooking cycles. Follow steps outlined above to program.
60. To lock in programming and exit, press .