beautypg.com

Operating your appliance (continued) – FireplaceXtrordinair 36A-BI User Manual

Page 11

background image

Page 11

OPERATING YOUR APPLIANCE (Continued)

Wood

This appliance is designed to burn natural wood only. Higher efficiencies and lower
emissions generally result when you burn air dried, seasoned hardwoods as compared to
softwoods or to green or freshly cut hardwoods. DO NOT BURN treated wood, garbage,
solvents, trash, coal, cardboard, colored paper, or wax impregnated logs (i.e. Duraflame,
etc.). Burning treated wood, garbage, solvents, colored paper or driftwood from salt water
may result in release of toxic fumes and may render the appliance ineffective and void the
limited warranty. Burning coal, cardboard or loose paper can produce soot, large flakes, char
or fly ash that can coat the inside of your appliance, causing smoke spillage into the room.

Choosing the kind of firewood to burn in your appliance depends on what is available to you.
If all you can obtain is softwoods, obviously, that will be your choice.

Softwoods such as pine and fir are easily ignited and burn rapidly with hot flames. Since
they burn so easily and quickly you will have to spend more time loading your firebox,
especially in the high burn mode. With softwoods it will be much more difficult to achieve an
overnight burn. Furthermore, softwoods make it necessary to reload the appliance more
often. The chart below outlines the advantages of using hardwood.

SPECIES*

LBS./CORD**

BTU's/CORD**

Hours per Cord at 40,000 BTU's

per Hour**

ALDER

2540

19,050,000

476

APPLE

4400

33,000,000

825

ASH

3440

25,800,000

645

BIRCH

3040

22,800,000

705

CEDAR

2060

15,450,000

386

COTTONWOOD

2160

16,200,000

405

DOGWOOD

4320

31,725,000

793

ELM

2260

16,950,000

423

FIR, DOUGLAS

2970

22,275,000

556

HEMLOCK

2700

20,250,000

506

MAPLE

3200

24,000,000

600

OAK, RED

3680

27,600,000

690

OAK, WHITE

4200

31,500,000

787

PINE

2250

16,875,000

421

REDWOOD

2400

18,000,000

450

SPRUCE

2240

16,800,000

420

* At 20% moisture content
** All values are approximate

If you have a choice it is best to use the more dense hardwoods for a longer lasting fire. The
best arrangement is to have a mix of softwoods and hardwoods for ease of start-up and a
longer lasting fire. Also, it is a good idea once the fire is established to use larger diameter
logs stacked tightly together. This will promote a longer burn time.

Wood is typically sold by the "cord". A cord is a nicely stacked pile of logs measuring 4 feet
wide by 4 feet high by 8 feet long. Always look for the driest wood especially if you purchase
your wood by weight. Unseasoned, wet wood is much heavier.

Moisture content of the wood greatly affects the way any appliance operates. Well seasoned
wood (split, stacked and kept dry for at least 12 months) is your best fuel choice.