FUJITSU FTP-632MCL302 - Manual (Page 2)

2
FTP-632MCL301/302
NOT FOR NEW
DESIGN
Part number FTP-632MCL301/302
Printing method Thermal-sensitive line dot method
Dot structure 576 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 72 mm
MCL301 80 mm
Paper width
MCL302 85 mm
Paper thickness 60~100
µ
m* 1
Cutting type full or partial
Number of columns 48 columns/line (24
×
12 dot font)
Maximum printing speed 640 dotlines/s (80 mm/s)
Alphanumeric KANA: 159 International characters: 195
Character types
JIS KANJI (FTP-622DCL101/111): approximately 6800
24
×
12 dots, (3.0
×
1.5 mm), 48 columns
24
×
24 dots, (3.0
×
3.0 mm), 24 columns
16
×
8 dots, (2.0
×
1.0 mm), 72 columns
16
×
16 dots, (2.0
×
2.0 mm), 36 columns
■ DESIGNATION
Part number
With Auto cutter FTP-632MCL301/302 *1
FTP-622DCL011/111 *2
FTP-622DSL011/012 *3
FTP-622CU101 *4
Item
Printer mechanism
Interface board
■ GENERAL SPECIFICATIONS
Specifications Item
Character composition, dimensions (H
×
W),
Number of characters
(Continued)
Centronics Standard with Auto cutter
Serial (RS-232C)
LSI(MCU)
*1: Constructed with mechanism+cutter+attachment. 301 is for front paper insertion (curl path) and 302 is for rear
paper insertion (straight path).
*2: 011 supports ANK and 101 supports ANK + Kanji.
*3: 012 supports ANK and 111 supports ANK + Kanji, + FLASH memory.
*4: CU101 supports Kanji and cutter control.