FujiFilm FinePix A800 - Manual (Page 98)

98
Connecting Camera Directly to Printer — PictBridge Function
MEMO
Press DISP/BACK to cancel the printing.
Depending on the printer, the printing may not be
canceled immediately or printing may stop midway
through.
When printing stops midway, briefly turn the camera off
and then on again.
Disconnecting the printer
A Check that “PRINTING” is not displayed on the
camera’s LCD monitor.
B Turn the camera off. Unplug the USB cable (mini-B).
MEMO
DPOF setting can be specified for images on internal
memory.
CAUTION
• In PictBridge function, images photographed on other
than a camera may not be printed.
• The camera cannot be used to specify printer settings
such as the paper size and print quality.
• Use internal memory or a Memory Card that was
formatted on FinePix A610/FinePix A800.
• Movies cannot be printed.
• Images photographed with a camera other than FinePix
A610/FinePix A800 may not be printed.
PRINTING PRINTING
CANCEL CANCEL