Freecom Technologies MusicPal - Manual (Page 100)

100
Freecom MusicPal
EN
6
6.. Configuring the Freecom MusicPal
1. Select Settings in your main menu after you have switched on the Freecom
MusicPal.
2. Select the LAN IP or WLAN IP menu item.
3. In the menu item select Use DHCP? No. Select Use DHCP? Yes when connecting
through a router.
Attention: If the Freecom MusicPal was connected with the computer
through a router, steps +5 are dispensed with.
4. You can now change the digits by turning the Navigate rotary knob. Press the knob
to confirm the digit you want and move automatically to the next. After confirming
all digits you move automatically to the next window, where you are asked to enter
the subnet mask.
5. Configure the subnet mask, the gateway and the DNS server just the way you did
the IP address. Here, too, you have to confirm all digits every time before moving to
the next window. You can find further information on networks and network basics
in the Appendix.
MusicPal
Internet Radio
Media Server
Settings
Extras
Settings
Clock
Edit Favorites
WLAN Access Point
WLAN IP
WLAN Region
LAN IP
IP Address
192 . 168 . 1. 23