Meridian Audio SRC-2010 - Manual (Page 46)

The Smart Remote Control User’s Manual
40 Faroudja
Macro setup
Follow these instructions to set up a macro:
1. From the macro menu, scroll to setup and press enter. The macro
is now being recorded.
2. Press the device button combination that you want to be recorded
into the macro.
If necessary, you can set a time delay between each command in
the macro. In the upper right-hand corner of the screen, you see an
hourglass icon
6
. After pressing a command, press the hourglass
icon to open the following screen:
Macro
0.5
Sec
2
Sec
5
Sec
10
Sec
1
Sec
3
Sec
7
Sec
15
Sec
Press one of the listed durations (0.5 seconds to 15 seconds) if you
want to have a time delay occur between device commands.
3. When you have finished recording the macro press enter. You see
the following screen: