Fisher & Paykel CG905 - Manual (Page 21)

19
Control dials
The dials control the flow of gas through the valve.
Using the burners
Models with auto-reignition (CG905DWAC)
1
Press the selected burner’s dial down gently and turn it anti-clockwise to HIGH.
The ignitors on all the burners will spark.
You do not need to hold the dial down.
2
Adjust the flame anywhere between HIGH and LOW. Do not adjust between HIGH and O (OFF).
3
After use, always turn the dials to O (OFF).
Models with flame failure protection (CG905DWFC, CG604DWFC)
1
Press the selected burner’s dial down gently and
turn it anti-clockwise to HIGH.
The ignitors on all the burners will spark.
2
Hold down the dial for about 5 seconds after the burner
has lit. Releasing the dial too soon will extinguish the flame.
3
Adjust the flame anywhere between HIGH and LOW.
Do not adjust between HIGH and O (OFF).
4
After use, always turn the dials to O (OFF).
Using your cooktop
Fig. 12 Pressing down then
turning the control dial
Fig. 10 Control dial for CG604DWFC & CG905DWFC models
Fig. 11 Control dial for CG905DWAC models
NEVER cook or
leave the dial
between HIGH
and O (OFF)
NEVER cook or
leave the dial
between HIGH
and O (OFF)
LOW
LOW
OFF (closed valve)
OFF (closed valve)
HIGH
HIGH
Burner
indicator
‘Burner On’
indicator