Fujitsu Siemens Computers LOOX 700 - Manual (Page 33)

錯誤 ! 尚未定義樣式。
A26391-K151-Z120-1-7619, Edition 1 25
Inserting and removing expansion cards
Two slots allow the operation of different expansion cards in your Pocket PC. Possible expansion
cards include memory cards (CF and SD/MMC), GPS cards, GSM/GPRS CompactFlash cards and
LAN cards.
!
Only use expansion cards suitable for the Pocket-PC.
Inserting and removing memory cards
A slot enables the operation of a memory card of the type "Secure Digital I/O" or "MultiMediaCard".
!
Observe the manufacturer's information when using memory cards.
Never use force when inserting or removing a memory card.
Make sure that no foreign objects enter the slot.
2
3
1
► Also press on the edge of the placeholder (1) so that the placeholder is pushed out of the slot
somewhat.
► Pull the placeholder out of the Pocket PC (2).
► Carefully push the memory card (3) into the slot.
The memory card may protrude by one to several millimetres (depending on the memory card type).
i
Keep the placeholder for the memory card in a safe place. When you remove the memory
card again, you should reinsert the memory card placeholder. This prevents foreign matter
from getting into the slot.