FUJITSU FTP-627USL402 - Manual (Page 2)

2
FTP-627USL401/402
n ParT NUMberS
* Interface board is the : FTP-627DSL601 (Serial/ USB), FTP-627DSL603 (USB), FTP-627DSL605 (Serial)
n SPeCiFiCaTiONS
Part Number Power
Printer mechanism with cutter and board FTP-627USL401 (USB interface) 5V / 24V
FTP-627USL402 (Serial interface) 5V / 24V
FTP-627USL410 (USB/Serial) 24V only
Length
Interface cables Serial (RS-232) FTP-628Y302 500mm
USB (V.1.1) FTP-629Y301 600mm
Power cables Logic FTP-629Y401 300mm
Head, motor FTP-629Y601 300mm
Part number FTP-627USL401/402
Printing method Thermal-line dot method
Dot structure 432 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 54 mm
Number of columns ANK 36 columns/line (maximum 12 x 24 dot font)
Paper width 58 mm
Paper diameter 60 mm
Paper thickness 60 to 90 µ m (some paper in this range may not be used because
of paper characteristics)
Printing Speed Maximum 100mm/sec. (800 dot line/sec.) at 24V, 25oC
Alphanumeric, kana: 159 types
International characters: 195 types
JIS Kanji (Kanji CG loaded board): about 6800 types
12 × 24 dots, (1.5 × 3.0 mm), 36 columns: ANK
24 × 24 dots, (3.0 × 3.0 mm), 18 columns: ANK
8 × 16 dots, (1.0 × 2.0 mm), 54 columns: ANK
16 × 16 dots, (2.0 × 2.0 mm), 27 columns: ANK
Barcodes UPC-A, UPC-E, JAN (EAN) 13, JAN (EAN) 8, Code 39, 1TF CODABAR
CODE128
QR, Maxi , PDF417
Printing mode Page mode, line mode
Specifications Item
Character types
Character, dimensions (W×H), number
of columns
Standard
Extended
2-D