Faria Instruments Antares IS0250a - Manual (Page 41)

39
Part VII: FAQ / Troubleshooting
The following items are common questions regarding the installation and use of the
Antares unit. If you are experiencing a problem not described in the FAQ section, please
visit
www.faria-instruments.com/antares.html for more detailed troubleshooting.
Problem Possible Cause Solution
"NO ECU" ALARM
Improper connection to
engine's harness Check connection (refer to
HN0605, pg 35)
No Depth / Water
Temp Signal Digital Depth Transducer
not installed Install a compatible digital depth
/ water temp transducer
Improper connection
Check connection (refer to
HN???
No GPS Signal
NMEA0183 GPS Antenna
not installed Install a NMEA0183 GPS
antenna
Improper connection Check connection
No Radio Control
Screen Not available on Antares
Model
Only some Antares are
available with Radio control. If
your Antares does not have a
Blue Radio Button, then it does
not have the radio control option
Unable to Control
Radio via Radio
Control Screen
Connected to incompatible
radio
See list of compatible radios at
www.faria-
instruments.com/antares.html
Improper connection
Check connection of Jensen
Remote Harness to Radio Plug
on HN0605 (pg. 36)
Fuel Flow Manager
not Working
Tanks not properly set up
Refer to Part II: System Setup
for instructions
Fuel Flow Manager
inaccurate Amount of Fuel not
properly set
Set Amount of Fuel to actual
amount of fuel in tank(s). Refer
to FUEL MANAGER, page 21
for instructions.