Freedom9 80 - Manual (Page 5)

freeView Power 80 User Manual
3
1.4 Features
The following are the main features for the freeView Power 80:
• Turn any AC powered device on or off via IP network and phone.
• Support turning on or off connected equipment manually using push buttons on the device.
• Integrated 10/100BASE-T Ethernet port for connection to a TCP/IP network.
• IP Address filtering prevent unauthorized computers from accessing the web interface
through the network.
• Supports NMS to control RPM through MIB. User also can use MIB to develop their
application interface.
• Download data and events log list to server.
• Daisy Chain expandable up to 16 units.
• When events occur, RPM can notify user by email and trap according to the pre-set
conditions.
• Allows users to configure the sequence in which power is turned on or off for each outlet.
This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped
loads. Sequencing also allows users to predetermine which piece of equipment is turned on
first so other equipment dependant on that unit will function properly.
• Customize and schedule to turn on or off the connected equipment.