Frymaster GASFRYERSMODELS 35 - Manual (Page 75)

2-38
ITEM PART # COMPONENT
1 Handle Assemblies, Oil Return Valve
106-4002SP FV Oil Return Assembly
106-4003SP DV Oil Return Assembly
2 Pump and Motor
826-1712 100-120V, 60 Hz (motor and gasket)
826-1756 208V, 50/60 Hz (motor and gasket)
826-1270 230V, 50/60 Hz (motor and gasket)
826-1755 250V, 50/60 Hz (motor and gasket)
3 826-1264 Pump, Viking 4 GPM 2-piece
106-3987 Filter Return Manifold (see additional components below)
4 813-0251 Nipple, ½” x 3.5 BM
5 823-4739 Bracket, Suction Nipple
106-3986 Filter Suction Manifold (see additional components below)
6 813-0247 Nipple, ½” x 3.5 BM
7 823-4737 Bracket, Suction Nipple
8 810-1668 Adapter, Male
* 810-1339 Flexline, 4.5”
Included with Filter Return/Suction Manifolds
9 810-1669 Adapter, Female
10 810-1680 Flexline, 6.5”
11 810-1160 Flexline, ⅝” x 3”
12 813-0062 Elbow, ½” 90° BM
13 813-0165 Elbow, Street ½” NPT BM
Oil Return Handle
14 807-2104 Microswitch (included with Item 1)
15 200-9065 Handle (included with Item 1)
16 816-0644 Grip (included with Item 1)
Miscellaneous
* 811-0746 Aluminum Tape (150’ roll)
* 811-0861 Foam Tape (sold by the foot)
* 807-1472 Heater Strip 120V-40W 56” (for 120V fryers)
* 807-1473 Heater Strip 240V-70W 56” (for 208-240V fryers)
Heater Tape
* 806-8065 100V, 25W, 18”
* 806-5933 120V, 25W, 18”
* 806-5934 208/240V, 25W, 18”
* 806-6733 250V, 70W, 56”
* 106-5011 Extension Harness
* 826-2100 Kit, Retrofit 120V Heater
17 823-4743 Connector, Female Suction
* 813-0156 Pipe Plug, ½”
* 810-1003 Valve, 180° 3-way Ball
* 807-2484 Valve, Solenoid Vent
18 813-0275 Nipple, ½” x 9 NPT BM Pipe
19 813-0087 Nipple, ½” x 1.5 NPT BM
20 816-0093 Gasket, Pump and Motor
21 816-0220 Insulation, Drain Safety Box (included with Item 1)
22 900-2110 Cover, Oil Return Microswitch (included with Item 1)
23 806-8342 Support, Oil Return Valve (included with Item 1)
24 806-9385 Support, Microswitch Mount, FV (included with Item 1)
* Not illustrated.
Oil Return Components
continued on next page . . .