Mn-2 – Furuno 520 User Manual
Page 70
MENU TREE
MN-2
ALARM SETUP
See page MN-1.
SEA STATE
(
FULL-AUTO, SEMI-AUTO, MANUAL-CALM,
MANUAL-MODERATE, MANUAL ROUGH)
DEVIATION LEVEL*
(
AUTO, LEVEL)
MANUAL PARAMETERS**
(WHEATHER; 1 to 10 ,
RUDDER GAIN; 0.1 to 2.0,
COUNT RUDDER; 0.1 to 4.0)
AUTO TRIM
(OFF,
ON, 1-100, 40)
AUTO NET TOWING
(
OFF, ON)
SPD CALC.
(
SOG, STW, MANUAL)
RADIUS OF ORBIT
(0.05 to 9.99 nm,
0.10 nm)
SPIRAL SPEED
(0.1 to 8.0 kt,
1.0 kt)
SYSTEM DATA
[MENU] key
AUTO mode menu
NAV mode menu
ALARM SETUP
See page MN-1.
NAV SRC
(
PORT 1, PORT 2, BOTH)
SEA STATE
(
FULL-AUTO, SEMI-AUTO, MANUAL-CALM,
MANUAL-MODERATE, MANUAL ROUGH)
DEVIATION LEVEL*
(
AUTO, LEVEL)
MANUAL PARAMETERS**
(WHEATHER; 1 to 10 ,
RUDDER GAIN; 0.1 to 2.0,
COUNT RUDDER; 0.1 to 4.0)
AUTO TRIM
(OFF,
ON, 1-100, 40)
WAYPOINT SWITCHING
(
AUTO, MANUAL)
NAV MODE
(
XTE, COURSE)
FISH MODE
(
OFF, ORBIT TO STBD,
ORBIT TO PORT, FIGURE EIGHT)
SPD CALC.
(
SOG, STW, MANUAL)
RADIUS OF ORBIT
(0.05 to 9.99 nm,
0.10 nm)
SPIRAL SPEED
(0.1 to 8.0 kt,
1.0 kt)
SYSTEM DATA
[MENU] key
MESSAGE (Shows error messages.)
CONTRAST/BRILLIANCE (Contrast: 1 to 16,
10, Brill: 1 to 8, 8)
ADVANCED AUTO
(
OFF, ON)
*: Available only when FULL-AUTO is selected at SEA STATE.
**: Default settings are depends on ship's length and width entered on installing.
MESSAGE (Shows error messages.)
CONTRAST/BRILLIANCE (Contrast: 1 to 16,
10, Brill: 1 to 8, 8)
*: Available only when FULL-AUTO is selected at SEA STATE.
**: Default settings are depends on ship's length and width entered on installing.