Frymaster KSCF18G Series - Manual (Page 26)

KSCF18G COOL ZONE SERIES GAS FRYERS
CHAPTER 3: INSTALLATION INSTRUCTIONS
3-13
3.9 Safety Switches (cont.)
C. Filtering: Drain Valve and Oil Return Handles
1. Drain Valve Handle: RED HANDLE.
Push the red handle (located in the fryer
cabinet) to the right to open the drain
valve when filtering. After all oil has
drained from the frypot and/or polishing
is complete, push the red handle left to
close the drain valve.
2.
Oil Return Handle: YELLOW LABEL.
The handle beneath the yellow oil return label
allows you to choose over-the-top or rear flush
oil return. Pull and turn the handle to the
desired oil return method to open the oil return
valve and activate the pump motor. After the
frypot is refilled and filtering is complete, turn
and push the oil return handle to close the oil
return valve and deactivate the pump motor.
Activate this handle only when filtering.
See Chapter 5 for more information on filtering.
See Chapter 7 for troubleshooting information.
DANGER
Always ensure that the over-the-top oil return faucet is located over the frypot or an
appropriate container before activating the over-the-top oil return system. If not, the
hot oil will spill and may cause burns.
DANGER
Allow oil to cool to 100°F (38°C) before draining into a metal container, stockpot, or
disposal unit.
DANGER
When draining oil into a disposal unit or portable filter unit, do not fill above the
maximum fill line located on the container.
Drain valve handle (red). Oil return handle
(yellow label).