Assembly – Fisher-Price GROW-WITH-ME TRIKE 72667 User Manual

Page 5

• Place two pedal hubs on the pedal axle so that the metal

tabs on the pedal axle fit into the slots inside each pedal hub.

Pedal Hub

Pedal Axle

Metal Tab

Slot

• While holding the pedal hubs on the pedal axle, insert the

assembly into the rectangular hole in the front wheel.

Rectangular Hole

Pedal Axle

Pedal Hubs

Front Wheel

• Push the pedal hubs in until they are flush with the surface

of the front wheel.

Pedal Hubs

Pedal Hub

Pedal Axle

• Turn the front wheel assembly over.
• Insert a pedal hub on top of the pedal axle and into the

rectangular hole in the front wheel.

• Insert the remaining pedal hub below the pedal axle and

into the rectangular hole in the front wheel.

• Push the pedal hubs in until they are flush with the surface

of the front wheel.

• Insert a lock washer into the pedal slot. Make sure the

raised tabs on the lock washer are facing the closed or
outside end of the pedal.

• Insert the other lock washer into the other pedal.

Pedal Hubs

Lock Washer

Raised Tabs

Pedal Slot

Closed End

• Place a scrap block of wood under the front wheel assembly.
• Fit a pedal on the pedal axle.
• With the lock washer centered over the pedal axle end, tap

the pedal with a hammer until it is secure.

• Repeat this procedure to attach the other pedal to the other

end of the pedal axle.

Lock Washer
(Inside Pedal)

Pedal Axle

Pedal

Assembly