Fisher-Price GROW-WITH-ME TRIKE 72667 - Manual (Page 4)

• Place a scrap block of wood on a flat surface.
• Fit a cap nut into the cap nut assembly tool.
• Place one end of the straight axle into the cap nut.
• Tap the end of the straight axle with a hammer. Make sure
the cap nut is securely attached to the straight axle.
• Remove the cap nut assembly tool from the cap nut.
• Slide a hubcap (peg side up) onto the straight axle.
• Slide a rear wheel (indented side down) onto the
straight axle.
Cap Nut
Cap Nut
Assembly Tool
Straight Axle
Rear Wheel
Indented
Side Down
Straight Axle
4
• Place a scrap block of wood on a flat surface.
• Turn the frame on its side with the exposed end of the
straight axle up.
• Place the cap nut assembly tool under the assembled rear
wheel and onto the cap nut.
• Slide a rear wheel (indented side up) onto the end of the
straight axle.
• Slide a hubcap (peg side down) onto the straight axle.
• Place a cap nut on the end of the straight axle.
• Tap the cap nut with a hammer. Make sure the cap nut is
securely attached to the straight axle.
• Dispose of the cap nut assembly tool properly.
• Set the frame assembly aside.
Cap Nut
Indented
Side Up
Cap Nut
Assembly Tool
Assembled Rear
Wheel
Straight Axle
Rear Wheel
• Turn the frame upside down.
• Insert the straight axle through the axle holes in the rear of
the frame.
Axle Hole Axle Hole
Frame
Straight Axle
Assembly
1
2
3
4
Hubcap
Hubcap
Frame