FUJITSU FTP-634MCL002 - Manual (Page 2)

FTP-634MCL001/002/FTP-624DCL/DSL002
2
■ DESIGNATION
*1: 001 is for front paper insertion (curl path) and 002 is for rear paper insertion (straight path).
*2: 002 supports ANK, 102 supports ANK and Kanji.
*3: 002 supports ANK, 103 supports ANK and Kanji.
Printer mechanism FTP-634MCL001/002* 1
RS-232C
LSI Micro Controller Unit FTP-624CU102
Thermal head cables FTP-624Y002* 1 , FTP-624Y003
Parallel interface cable FTP-441Y201
Cables
Serial interface cable FTP-624Y301
Power cables (logic, head and motor) FTP-621Y401, FTP-621Y601
Part number Item
FTP-624DCL002* 2
FTP-624DSL002* 3
Centronics
Interface Board
■ GENERAL SPECIFICATIONS
(Continued)
Part number FTP-634MCL001/002
Printing method Thermal-sensitive line dot method
Dot structure 576 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 72 mm
Paper width (MCL001) 80 mm
Paper width (MCL002) 85 mm
Paper thickness 60 to 100
µ
m* 1
Number of columns 72 columns/line (16
×
8 dot font)
400 dotlines/s (50 mm/s)
[Condition] 1 ply, printing on high sensitive thermal paper,
8 columns of “H” /line, double density 16
×
8 dot font,
room temperature, 8.5 VDC drive
JIS ANK : 128 International : 195
Character types ASCII : 31
24
×
12 dots, (3.0
×
1.5 mm), 48 columns
16
×
8 dots, (2.0
×
1.0 mm), 72 columns
16
×
16 dots, (4.0
×
2.0 mm), 36 columns
24
×
24 dots, (6.0
×
3.0 mm), 24 columns
Interface Centronics / RS-232C
Specifications Item
Maximum printing speed
Character composition, dimensions (H
×
W),
Number of characters