Fujitsu Siemens Computers S7110 - Manual (Page 15)

15
Internal Device Configurations Submenu of the Advanced Menu
The Internal Device Configuration submenu allows the user to configure other internal devices.
Figure 9. Internal Device Configuration Submenu
Table 9: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu
Menu Field Options Default Description
Serial ATA Controller: ■ Disabled
■ Enabled
[Enabled] Enables or disables serial ATA devices.
AHCI Controller: ■ Disabled
■ Enabled
[Enabled] Enables or disables the AHCI (Advanced Host Controller Interface).
This selection does not appear when PATA mode is enabled.
IDE Controller: ■ Disabled
■ Enabled
[Enabled] Enables or disables the IDE port.
Bluetooth(R): ■ Disabled
■ Enabled
[Enabled] Enables or disables the Bluetooth(R) device, when present.
LAN Controller: ■ Disabled
■ Enabled
[Enabled] Enables or disables the LAN controller.
Wireless LAN: ■ Disabled
■ Enabled
[Enabled] Enables or disables the Wireless LAN device.
IEEE1394 Controller: ■ Disabled
■ Enabled
[Enabled] Enables or disables the IEEE 1394 device.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Main Advanced Security Power Savings Exit
Item Specific Help
[Disabled]
Serial ATA port is
disabled.
[Enabled]
Serial ATA port is
enabled.
Internal Device Configurations
PhoenixBIOS Setup Utility
Serial ATA Controller: [ Enabled]
AHCI Configuration: [Enabled]
IDE Contoller:
[Enabled]
Bluetooth(R): [Enabled]
LAN Controller:
[Enabled]
Wireless LAN: [Enabled]
IEEE1394 Controller: [Enabled]
A d v a n c e d M e n u