Allen bradley dh+ description, Driver scope of supply, Provided by the supplier of 3 – FieldServer FS-8700-12 User Manual
Page 3: Party equipment, Hardware, Required 3, Party software
FS-8700-12 DH+ Driver Manual
Page 3 of 16
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
1
ALLEN BRADLEY DH+ DESCRIPTION
The DH+ driver allows the FieldServer to transfer data to and from devices using DH+ protocol. The
Communications Adapter card is included with the FieldServer. The FieldServer can emulate either a Server or
Client.
The information that follows describes how to expand upon the factory defaults provided in the configuration files
included with the FieldServer.
2
DRIVER SCOPE OF SUPPLY
2.1
Supplied by FieldServer Technologies for this Driver
FieldServer
Technologies
PART #
Description
FS-8917-19
Connector AB DH+ Driver
Config.csv
Template loaded if no custom configuration ordered, otherwise Custom
configuration loaded.
2.2
Provided by the supplier of 3
rd
Party Equipment
2.2.1 Hardware
Part #
Description
AB DH+ compatible PLC, e.g. SLC5/03, PLC 5/40, etc
1
DH+ Client, e.g. RSView, Wonderware, Intellution FIX, GE Cimplicity, etc.
2
FS-23083 DH+ configuration cable
3
. Refer to Appendix A.1
2.2.2 Required 3
r d
Party Software
Part #
Description
DL2.exe
Runs on a PC. Used only if a change to DH+ parameters (Station address, baud etc) required. Requires
DH+ configuration cable (not supplied)
Refer also to Appendix A.1
1
If FieldServer used as Allen Bradley DH+ Client
2
If FieldServer used as Allen Bradley DH+ Server
3
Used only if a change to DH+ parameters (Station address, baud etc) required.