FujiFilm eyeplate Digital Camera - Manual (Page 9)

9
Battery
Charge
Camera
Software
Data
h About the file counter (file numbers)
File numbers (No. 0001 to 9999) are automatically assigned to images when they are shot. The assigned file numbers are then saved
with the images during downloading.
✽ Because the file numbers assigned when shots are taken are stored on the camera, the file numbers of images do not change while
they remain on the camera.
✽ If you delete an image on the camera after shooting it, the file number of the deleted file is skipped.
✽ When you reset the file counter, the file numbers for the next images shot begin again from “0001”. However, the file counter can only
be reset when [Delete All Images] or [Format] is selected in the “eyeplate Config” screen.
■eyeplate configuration screen
Beep tone Battery charge level Image size VGA : 640 × 480 pixels
QVGA: 320 × 240 pixels
Deletes all the images on
the camera.
Deletes all the data in the
camera’s internal memory
and formats (initializes) the
memory.
Current file counter setting
(the file number of the next
image shot)
Number of images shot/
Number of available shots
Updates the screen to show
the latest information on the
camera.
✽ Clicking the [Update] button
when you connect another
camera to the PC updates the
screen to show the information
for the new connected camera.
Closes the window
Resets the file counter.
✽ The file numbers for the next
images shot begin again from
“0001”.
✽ Only available when [Delete
All Images] or [Format] is
selected.